SDSHobby
DYNAM BRUSHLESS ESC-60A FOR MODEL AIRPLANES
| Cont. Current | 60A |
| Burst Current (>10s) | 80A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 5S-18S |
| User Programmable | yes |
| Weight | 60g |
| L*W*H (Size) | 70*31*14mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-40A FOR MODEL AIRPLANES
| Cont. Current | 40A |
| Burst Current (>10s) | 55A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 5S-18S |
| User Programmable | yes |
| Weight | 35g |
| L*W*H (Size) | 55*28*12mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-30A FOR MODEL AIRPLANES
| Cont. Current | 30A |
| Burst Current (>10s) | 40A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-4S |
| Cells of Ni-Cd/Ni-MH | 5S-12S |
| User Programmable | yes |
| Weight | 25g |
| L*W*H (Size) | 45*24*11mm |
| Balance Discharger Protection | N/A |
Specifications:, , Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-25A FOR MODEL AIRPLANES
| Cont. Current | 25A |
| Burst Current (>10s) | 35A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-4S |
| Cells of Ni-Cd/Ni-MH | 5S-12S |
| User Programmable | yes |
| Weight | 22g |
| L*W*H (Size) | 45*24*11mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-18A FOR MODEL AIRPLANES
| Cont. Current | 18A |
| Burst Current (>10s) | 22A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-4S |
| Cells of Ni-Cd/Ni-MH | 5S-12S |
| User Programmable | yes |
| Weight | 19g |
| L*W*H (Size) | 45*24*11mm |
| Balance Discharger Protection | N/A |
| means the low voltage cut-off function is disabled. For example | For |
| when “Medium” cut-off threshold is set, the cut-off voltage will be | 14.4*45%=6.5V. |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually, :Low / Medium /, For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., battery, low / medium / high cut off voltage for each cell is:, .6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower, Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
FUTABA 60CELL CHARGER SWITCH KITS FOR RECEIVER L25CM
| Application | RC airplanes, especially for gas engine |
Specifications:,
D0.8mm 60cell lead wire High tensile resistant, small resistance Gold ...SDSHobby
IMAX B6AC 1-6S MULTIFUNCTIONAL PROFESSIONAL BALANCE CHARGER/DISCHARGER WITH BUILT-IN AC ADAPTOR AND OUTPUT 1A / 5W
| Operating Voltage Range | AC 100-240V; DC 11-18V |
| Charging Current Range | 0.1-5.0A |
| Discharging Current Range | 0.1-1.0A |
| Max. Input/Charging Power | 50W |
| Lithium Battery | 1-6S |
| Ni-Cd/Ni-MH Battery | 1-15S |
| Lead Battery Voltage | 2-20V |
| Dimension | 135 * 144 * 36mm |
| Available Plugs | USA, Euro and Australia |
Introduction:, This item is for a rapid charger/discharger for all kind of battery of RC hobby, with built in balancer for lipo battery. Battery that can be charged by this charger,Lipo / Li-ion / LiFe / NiMh / NiCad / Pb / Lead Acid, Specification:, Ma. Discharging Power: 5W, Features:, Optimized operating software, Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically., Processing time limit:, You can also limit the maximum process time to avoid any possible defect., Accessories Included:,
B6AC features the so-called AUTO function that set the feeding ...SDSHobby
SUPER ROBOT GRIPPER FOR AURDUINO ROBOT/2-FREE DEGREE GRIPPER OF MECHANICAL ARM (WITHOUT SERVO)
Product Description:, The mechanical arm is, Kindly Remark:, This product does not contain servos. And it delivers by commecial parts, users need to install by yourself., http://www.sdshobby.com/towerpro-mg995-11kg552g-analog-servo-high-speed-wmetal-gears-5t-futaba-for-rc-hobby-and-robot-p-967.html,
parallel holding things, easy to catch the object. The clawface ...SDSHobby
2PCS* GWS 3 BLADES ELECTRIC 10X6 10*6 10X6R 10*6R POSITIVE/ REVERSE PROPELLER GWS HD1060
Product Description:, Size:, GWS, Rotation Diameter:, 10in, Aperture:, 6.2mm, Package:, Positive Propellers 2pcs/ ba, Application:, It’s suitable for RC airplane or multicopter.,
HD1060 3 Blades Positive Propeller / GWS HD1060 3 Blades ...SDSHobby
2PCS* GWS 3 BLADES ELECTRIC 9X5 9*5 9X5R 9*5R POSITIVE/ REVERSE PROPELLER GWS HD9050
Product Description:, Size:, GWS, Rotation Diameter:, 9in, Aperture:, 6.2mm (include different propeller gaskets), Package:, Positive Propellers 2pcs/ ba, Application:, It’s suitable for RC airplane or multicopter.,
HD9050 3 Blades Positive Propeller / GWS HD9050 3 Blades ...SDSHobby
2PCS* GWS 3 BLADES ELECTRIC 8X4 8*4 8X4R 8*4R POSITIVE/ REVERSE PROPELLER GWS HD8040
Product Description:, Size:, GWS, Rotation Diameter:, 8in, Aperture:, 6.2mm, Package:, Positive Propellers 2pcs/ ba, Application:, It’s suitable for RC airplane or multicopter.,
HD8040 3 Blades Positive Propeller / GWS HD8040 3 Blades ...SDSHobby
2PCS* GWS 3 BLADES ELECTRIC 7X3.5 7*3.5 7X3.5R 7*3.5R POSITIVE/ REVERSE PROPELLER GWS EP7035
Product Description:, Size:, GWS EP7035 3 Blades Positive Propeller / GWS EP7035 3 Blades Reverse Propeller, Rotation Diameter:, 7in, Aperture:, 6.2mm, Package:, Positive Propellers 2pcs/ ba, Application:, It’s suitable for RC airplane or multicopter.,
g, or Reverse Propellerspcs/ ba gSDSHobby
2PCS* GWS 3 BLADES ELECTRIC 6X3 6*3 6X3R 6*3R POSITIVE/ REVERSE PROPELLER GWS EP6030
| Package | Positive Propellers 2pcs/ ba |
Product Description:, Size:, GWS EP6030 3 Blades Positive Propeller / GWS EP6030 3 Blades Reverse Propeller, Rotation Diameter:, 6in, Aperture:, 3.05mm, Application:, It’s suitable for RC airplane or multicopter.,
g, or Reverse Propellerspcs/ ba gSDSHobby
2PCS* GWS 3 BLADES ELECTRIC 5X3 5*3 5X3R 5*3R POSITIVE/ REVERSE PROPELLER GWS EP5030
| Package | Positive Propellers 2pcs/ ba |
Product Description:, Size:, GWS EP5030 3 Blades Positive Propeller / GWS EP5030 3 Blades Reverse Propeller, Rotation Diameter:, 5in, Aperture:, 3.05mm, Application:, It’s suitable for RC airplane or multicopter.,
g, or Reverse Propellerspcs/ ba g